RO6G Replacement Wayne Dalton Garage Door Bottom Weather Seal 154448 for Weather Stripping Fit 20 feet Wide Doors (20 feet)
$39.07
- 1.【20 FT GARAGE DOOR SEAL】For wayne dalton garage door.Part number: 154448.For Wayne Dalton company's 8000,9000, 70/180,980 and 300 Series Doors,Fits models TG, TW, 2411, 2415, TS-125 and others
- 2.【WAYNE DALTON GARAGE DOOR SEAL】Seal Compatible with Models: TS125, TS150, 8300, 5150, 9100, old 6100, 9500, 9600, 9605, 9700, 9800, 5140, 5145, 9400, 9405, 451, 216, 220,464, 8650, 8000, 8100, 8200
- 3.【FLEXIBLE WEATHERPROOFING GARAGE DOOR SEALS】Made with Durable flexible waterproof rubber. Seals garage door to keep out dust, cold air, leaves,debris and pests.Your garage will not crack, move, or shatter despite temperature extremes(-40°~240°F)
- 4.【EASY TO INSTALL】Heavy Duty weatherproofing sealing Weatherstrip 3-1/4” overall width, Length is 2” MINIMUM Longer than size ordered, easily cut to adapt your need. Apply lubricant to installing it makes installing so much easier
- 5.【ROUND GARAGE DOOR WEATHER SEAL】PLEASE NOTE !!!This is a round bead type seal designed to fit into a round Garage door track.Not T shaped track!!!If you are not sure about the compatibility, please contact us before purchasing and we will help you as soon as possible
Product description
Replacement Wayne Dalton Garage Door Bottom Weather Seal 154448 for Weather Stripping Fit 20 feet Wide Doors.Made with Durable flexible waterproof rubber,could work for a long time. Pack Include: 1 x Garage Door Weather Stripping Bottom Seal The garage door seal length: 20.2' FT The garage door seal Width: 3-3/4 Inch Having a good garage door weather stripping bottom seal on your garage door is important to keep your garage clean,quiet,warm in winter and cool in summer.The weather stripping reduce sound up to 5 times. If you have an uneven garage floor you can use a larger bottom seal to help close off gaps. Product installs easily with two people Scrape dirt and corrosion out of the garage door bottom seal track with a screwdriver and a stiff brush after removing old seal. Apply lubricant to track makes installing so much easier One guide’s seal into track and pulls, the other feeds the seal If your door currently does not have the ability to accept this style of weather seal, consider replacing the bottom retainer on the door. PLEASE NOTE: For use with WAYNE DALTON doors ONLY!!!
| Manufacturer | RO6G |
|---|---|
| Part Number | 154448 |
| Product Dimensions | 609.6 x 8.26 x 0.38 cm; 1.07 kg |
| Item model number | 154448 |
| Size | 20 Feet |
| Colour | Black |
| Material | Rubber |
| Included Components | No |
| Batteries Included? | No |
| Batteries Required? | No |
| Item Weight | 1.07 kg |
Kristie Otway (verified owner) –
As described. Cut to fit my smaller doors. Easy to install with a little dish soap and water.
mike (verified owner) –
This is the only product that works great for older overhead garage doors the newer style bottom on the doors now are totally different
Amazon Customer (verified owner) –
Price was good geoduck works as designed
L Maybee (verified owner) –
make sure you order the right one , easy after that
Mihail Duta (verified owner) –
fits well.
DB (verified owner) –
Good quality.
It fit perfectly
Wilfried (verified owner) –
Excellent
Amazon Customer (verified owner) –
Sealed the garage door. Easy to 8nstall, just cut to length
Bob_B (verified owner) –
Good replacement garage door seal. Fits Wayne Dalton doors perfectly. The bulb profile will not fit other door brands so make sure you have a Wayne Dalton Door (or Kinnear before Wayne Dalton bought them out) what door before you order. Dimensions are exactly like the original OEM seal.
Material is supple yet stiff enough to feed into a wide door with little difficulty. Make sure you clean the track and lubricate it with soapy water, spray silicone, or other lubricant. I used dry nano lubricant spray and it worked perfectly.
Michael T. Doherty (verified owner) –
When you find the correct replacement part, this rounded bead, it is actually easy to install!! No hot water soaking needed. But I did have to use some dishwash liquid to lubricate after pulling this 2/3ds of the way along the track. Hint: don't trim it to
exact size until it has had time to relax!! Pulling the product into place can stretch it and it could shorten itself as it rebounds to normal shape after installation, which may leave you with small end gaps. I worked it along the rail to make sure any stretched spots were relaxed b4 the final trim. I
suppose this all depends on the condition of the rails on the bottom of your own door! Mine are in good condition with minor weathering – which also played into how easy the install was.
OC Cat (verified owner) –
My handyman put this in. Looks good…..and seals. Can't ask for more.
Dee M (verified owner) –
Second try to replace my aged and hard weather strip. First ordered a 3/16 bead but needed a 1/8 bead. The correct one went in smoothly with three people. One feeding and two pulling.
Guardian (verified owner) –
I have an Amarr door think it’s a Stratford 1000 and they no longer make this seal with the dove tail. This fit it more than perfect and seems to be good quality.
Michael T. Doherty (verified owner) –
I recently replaced the weather seal on my garage door with the Wayne Dalton Garage Door Bottom Weather Seal 154448, and I couldn’t be happier with the results! The 20 feet of weather stripping was the perfect size for my 20-foot-wide garage door. The seal fits snugly and does a great job of blocking drafts, dust, and moisture from entering the garage, which has made a noticeable difference in keeping the temperature more stable inside. I also appreciate how durable and flexible the material is, ensuring it holds up well to wear and weather conditions.
Overall, I’m very satisfied with the Wayne Dalton Garage Door Bottom Weather Seal. It’s an affordable and effective way to improve the insulation of your garage and keep out the elements. If you're looking to replace or upgrade your garage door seal, I highly recommend this product!
Anne Pham (verified owner) –
When you find the correct replacement part, this rounded bead, it is actually easy to install!! No hot water soaking needed. But I did have to use some dishwash liquid to lubricate after pulling this 2/3ds of the way along the track. Hint: don't trim it to
exact size until it has had time to relax!! Pulling the product into place can stretch it and it could shorten itself as it rebounds to normal shape after installation, which may leave you with small end gaps. I worked it along the rail to make sure any stretched spots were relaxed b4 the final trim. I
suppose this all depends on the condition of the rails on the bottom of your own door! Mine are in good condition with minor weathering – which also played into how easy the install was.